Have a question? Give us a call at (888) 378-1016

24 Foot Loop with a 50' Lead-In - SC 24-50 - Saw-Cut Loop

24 Foot Loop with a 50' Lead-In - SC 24-50 - Saw-Cut Loop
The SC 24-50 Preformed Saw-Cut Inductance Loop is used for saw-cut installations that require a 3/16" groove to be cut into the concrete or asphalt. After the cut into the concrete or asphalt the wire is stuffed and sealed into the surface then sealed with loop sealant.

$117.15 each
OR
 

Details

The SC 24-50 Preformed Saw-Cut Inductance Loop is for installation in asphalt or concrete with a 3/16" saw-cut groove. Saw-cut loops are designed for existing driveways and surfaces and this loop comes pre-tested in three different ways, including a meg-ohm meter, inductance meter, and live detector. With the lead-in and loop jackets the same size, there's no need for a second cut, streamlining the installation process.

Features:

  • Custom Polyethylene Outer Jacket
  • Compact Size And Reduced Weight
  • No Air Pocket In Loop Wire Design
  • Pre-Phased And Color Coded At Factory
  • 16 AWG Loop Wire Design For Superior Performance
  • Requires 30-40 percent Less Sealant To Seal Groove
  • For Installation In Asphalt Or Concrete 3/16 Saw-Cut Groove
  • Built-In Backer Rod And Third Level of Insulation Protect Against Failure

Loop Specifications:

  • Install Loop Black Side Up
  • Conductor: #16 AWG Wire
  • Loop Size: 24' (4'X8' or 6'X6')
  • Outer Jacket: LLDPE Outer Jacket
  • Inner Jacket: Micro-Dusted Nylon Coated Inner Jacketed

Lead-In Specifications:

  • Length: 50'
  • Conductor: #16 AWG Wire
  • Outer Jacket: LLDPE Outer Jacket
  • Inner Jacket: Micro-Dusted Nylon Coated Inner Jacketed

Additional Information

SKU SC24-50
Manufacturer Nice Apollo Gate Operators
Condition New

24 Foot Loop with a 50' Lead-In - SC 24-50 - Saw-Cut Loop

You may also be interested in the following product(s)