4' x 12' or 6' x 10' Gate Loop with a 50' Lead In - SC 32-50 - Saw-Cut Loop (14'-16' Wide Driveways)
The SC 32-50 is used for saw-cut installations that require a 3/16" grove to be cut into the concrete or asphalt. After the cut into the concrete or asphalt the wire is stuffed and sealed into the surface then sealed with loop sealant.
The SC 32-50 is a 32 foot loop (4x12 ft or 6x10 ft) with a 50' lead in.
A Benefit of the SC 32-50 is that the lead-in fits within a 3/16" saw-cut groove preventing wasted time spent double saw-cutting or doubling blades to cut the home run lead-in.
SC 32-50 has a custom polyethylene outer jacket. This jacket is used to protect a micro-dusted nylon coated inner jacketed 16AWG stranded wire. The saw-cut loop has a built in backer-rod securely fitting a 3/16" saw-cut groove eliminating the need of applying a backer-rod to hold the loop to the bottom of the saw-cut groove and requires 30-40% less loop sealant to seal the groove.
|Loop Size||4' x 12'|
|Product Type||Vehicle Detection Loop|
|Manufacturer||Nice Apollo Gate Operators|
You may also be interested in the following product(s)
4' x 8' or 6' x 6' Gate Loop with a 60' Lead-In - EL 24-60 - Direct Burial Exit Loop (10'-12' Wide Driveways)
4' x 8' or 6' x 6' Gate Loop with a 50' Lead-In - SC 24-50 - Saw Cut Loop (10'-12' Wide Driveways)
4' x 12' or 6' x 10' Gate Loop with a 60' Lead-In - EL 32-60 - Direct Burial Exit Loop (14'-16' Wide Driveways)