UltraLoop Multi-Voltage Loop Detector - EMX ULT-MVP-DTEK

UltraLoop Multi-Voltage Loop Detector - EMX ULT-MVP-DTEK

***This product has been discontinued and replaced by EMX Ultraloop Single Channel Multi Voltage Vehicle Loop Detector.***

The UltraLoop vehicle loop detector by EMX combines small size with a 9VDC - 240VAC input range. The ULT-MVP-DTEK provides relay contact outputs indicating a vehicles presence and a second set of contacts that may be used for loop fault or pulse on entry / pulse on exit, or the new Detect-On-Stop feature. This unit features an extremely user friendly design that makes for simple set-up, operation, and trouble shooting. MUST BUY THE HAR-11 FOR THIS TO WORK

Specifications

• Sensitivity: 10 levels, 0-9
• UltraMETER Display: Indicates optimum sensitivity level
• Loop frequency: 4 settings (low, med-low, med-hi, high)
• Loop inductance: 20...2000uH (Q factor > 5)
• Grounded loop: Isolation transformer allows operation with poor quality loops
• Automatic tuning: Detector tunes to loop on power-up and following frequency count function
• Environmental tracking: Automatic compensation
• Surge protection: Loop circuitry protected by surge suppressors
• Presence relay: SPDT relay contacts
• Output B relay: SPDT relay contacts
• Contact rating: 2A @ 30VDC, 0.5A @ 125VAC
• Power / loop fault indicator: Green LED
• Detect / frequency count indicator: Red LED
• Detect on Stop: Requires vehicle to stop for a minimum of 1 second (option)
• Automatic Sensitivity Boost: Increases sensitivity after initial detection to prevent dropout due to high-bed vehicles
• Power: 9...60VDC / 12...240VAC
• Operating Current: 20 mA standby / 50mA detect
• Connector: socket mount - 11 pin male
• MUST BUY THE HAR-11 FOR THIS TO WORK