CP3-100-3W CP3 Gate Free Exit Wand 100ft Cable - 3 Wire

Availability: In stock


Quick Overview

CP3-100 Vehicle Sensor Kit Exit Wand (Driveway Exit Sensor and Sensor Controller) - Includes 100' Cable

CP3-100 Vehicle Sensor Kit Exit Wand 100 ft - 3 wire


Compare to Apollo 217  Vehicle Sensor Kit Exit Wand

This is a three-wire, self-contained system with no external board to install. Simply hook up wires to security or home automation panel (TRIP INPUT) or directly to gate operator. This unit comes with 100' of attached cable.


System Description:

♦ Covers 12 foot wide driveway when buried beside driveway
♦ Single-zone system
♦ Fully self-contained system—no external circuit board to install
♦ Exceptionally Solar friendly!
♦ Lowest stand-by current in the industry
♦ Voltage: DC only
♦ Normally no earth grounding required
♦ RFI/EMF protected
♦ 3-Wire
♦ Long field life and reliable electronics


System Components:

♦ This is a fully self-contained system offering a relay closure. No outboard devices required.
♦ Probe comes with 100' direct burial cable attached


System Application:

♦ Provides a relay closure when hooked up directly to the TRIP INPUT on home automation panel or security panel.
♦ Provides a trigger to activate transmitters, pagers and CCTV.
♦ Provides a trigger to activate gate operators.


Technical Specifications:

♦ Power Required: 10-40 VDC
♦ Standby Current: 150 Microamps maximum
♦ 25 Milliamp maximum alarm current
♦ Relay Contacts

  • 3 Wire: SPST, Trip to GROUND

♦ Relay Contact Rating: 1 amp /  24 VDC min. load
♦ Relay Time: 2 to 3 seconds
♦ Temperature Range: -25 F to 125F
♦ Dimensions: 20" long x 075" diameter

Additional Information

SKU CP3-100
Manufacturer Nice Apollo Gate Operators
Condition New