Diablo DSP-6LP Microdetector for SOLAR Loop Detectors AC or DC 10-30v

Our low power detector has been re-designed to be used on any voltage and either polarity from 10 to 30 Volts AC or DC. This low power vehicle detector is perfect for solar powered gate installations. This detector beats all competition for current consumption. Works on all gate and access control applications that require extremely low current draw from a solar powered gate installation. The 6LP detector is " fail-secure", and should be used on free exit loops.
Part Number: DSP06-LP

$78.26 each
OR
 

Details

Diablo DSP-6LP Microdetector for SOLAR Loop Detectors AC or DC 10-30v

The DSP-6LP vehicle detector is designed for solar-powered gate applications. This detector will operate on any voltage from 10 to 30 Volts AC or DC and draws approximately 1 milliampere while waiting for a car. The power LED winks continuously once per second to indicate the detector is operating in the low power mode. The DSP-6LP detector beats all competition for reliability, simplicity, and "no car" current consumption.

This series of Diablo's detectors are covered by United States patent number US 7,132,959, "Non-Interfering Vehicle Detection". These detectors are virtually crosstalk-free in most applications.

Working on battery-powered and other parking and access control loop applications, the DSP-6LP is preset to the normal sensitivity level used in parking/access control applications and tunes itself to the best operating frequency.

This micro-sized detector will automatically adjust its sensitivity level when used on different-sized loops. Environmental conditions are constantly compensated with the DSP-6LP's HYPERTRACK software.

- Specs -
Loop Size: Works on any in-ground inductive loop from 20 to 1200 mH.
Indicators: Separate Power and Detect LED's. The green Power LED will wink continuously once per second under normal operation. The red Detect LED will turn on solid for a vehicle.
Sensitivity: Automatic - compensates for large loops and large lead-ins.
Output Ratings: Single output, 1 amp relay at 30 VDC
Resistive: The relay common, NO, and NC contacts are available.
Ordering Information: DSP-6LP standard version.
Power: 10 to 30 Volts AC or DC. Approximately 1 mA (no car and all loop sizes) and less than 25 mA with a car on the loop.
Operating Temperature: -35°F to 165°F (-37°C to 74°C)

- Size -
Height: 1.52"
Width: 2.9"
Depth: 1.56"

- Connector -
Removable 7-pin terminal block. Pin assignments are shown below - from left to right:
1 - Relay (NC) (opens for detect)
2 - Relay Common
3 - Relay (NO) (closes for detect)
4 - Power Common
5 - Power in (10 to 30 Volts AC or +DC)
6 - Loop
7 - Loop

SKU DSP06-LP
Product Type Loop Detector
Manufacturer Nice Apollo Gate Operators
Condition New